Pedicle Screw Insertion Simplified

Anatomy of Vertebral Pedicle

pedicle anatomy

Width (narrowest transverse diameter):

  1. Narrowest at T4-T5 (4-5 mm)
  2. Above and below this level, the width gradually increases to almost double at T1 and T11 (8 mm)
  3. Narrowest for lumbar at L2 (two for tiny; 2 X 3 = 6 mm)
  4. Increases gradually to L5 (5 X 3 = 15 mm)

Height (narrowest sagittal diameter):

  1. Narrowest at T1 (8 mm; T1 pedicle is like a square)
  2. Gradually increases downwards and is almost double at T12 (16-17 mm)
  3. Lumbar region i.e. L2-L5 (15 mm)

Sagittal or Craniocaudal angle (obliquity in the sagittal plane between the axis of the pedicle and the superior endplate of the vertebra):

  1. T1-T11 (15-20 degrees caudad)
  2. T12-L1 (5 degrees caudad)
  3. L2-L5 (almost parallel to the superior endplate, i.e. ~0 degrees)

Coronal, Transverse or Mediolateral angle (obliquity in the transverse plane between the axis of the pedicle and the anteroposterior axis of the vertebra):

  1. Narrowest at T11-L1 (~5 degrees medial)
  2. Increases as we go up to T1 (25 degrees medial)
  3. Increases 5 degrees with each vertebra as we go downwards from L1 to L5 (25 degrees medial)
    • L1: 5 degrees
    • L2: 10 degrees
    • L3: 15 degrees
    • L4: 20 degrees
    • L5: 25 degrees
    • S1: 30 degrees

Entry point of Pedicle Screw

Thoracic spine

Safe zone: Lateral to the midpoint of superior facet and Proximal to the midpoint of transverse process

In the thoracic spine, transverse process commonly does not align with the pedicle in the axial plane. Thus, the anatomic landmarks that are used for lumbar pedicle screw insertion cannot be reliably used in the thoracic spine. The transverse process is rostral to the pedicle in the upper thoracic spine and caudal to the pedicle in the lower thoracic spine (crossover occurs at T6-7).

pedicle screw entry

Mnemonic: 7,8,9 on the line

Entry pointProgressionVertebrae in ascending orderVertebrae in descending order
Line with superior border of transverse process – Lateral to midpoint of superior articular facetMost cranial and medialT7, T8T9
Line with junction of superior border and upper 1/3rd of transverse process – Lateral to midpoint of superior articular facetMore caudal and lateralT6T10
Line with upper 1/3rd of transverse process – Lateral to midpoint of superior articular facetMore caudal and lateralT5, T4T11
Line with midpoint of transverse process – Transverse process/Lamina junctionMost caudal and lateralT1, T2, T3T12

Lumbar spine

1. Intersection technique (most commonly used): Lateral aspect of facet joint and midpoint of transverse process

2. Pars-interarticularis technique (medial to intersection technique)

3. Mamillary process technique (lateral to intersection technique)

Gearshift technique

To avoid medial wall penetration, the gearshift (2 mm blunt-tipped pedicle finder) is initially pointed laterally when the pedicle is entered.

Direction of Pedicle Screw

Medial to medial wall of pedicle: Dural sac

Inferior to medial wall of pedicle: Nerve root in neural foramen

Ventral penetration of Screw

80% of vertebral body


Write your Viewpoint 💬

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.